The RCW directories names for the T1040RDB boards conform to the following
naming convention:


ab_c_d:

a = 'R' if RGMII@MAC4 or RGMII@MAC2 is supported /
	'N' if not available/not used
b = 'R' if RGMII@MAC5 is supported / 'N' if not available/not used

c = What is available in slot1

For the Slots (c):
 'P' if PCIe
 'S' if SGMII
 'Q' if QSGMII

For the srds_prtcl (d):
d = 'hex value of serdes1 protocol value'

Note: For serdes protocol 0x66, RGMII is avaliable on FM@MAC4 and FM@MAC5
So RR_P_66 means:
 - RGMII@mac4
 - RGMII@mac5
 - One PCIe slot
 - SERDES1 Protocol is 0x66

Files naming convention
=============================

rcw_x.rcw
rcw_x_clockmode.rcw

x = Core frequency
clockmode = single_source for single_source clocking. If single_source is not
	present, it means separate clock source for sysclk and ddrclock

For example,
	rcw_1000MHz.rcw means rcw for core frequency of 1000MHz having
	separate clock sources

	rcw_1000MHz_single_source.rcw means rcw for core frequency of 1000MHz
	having single clock source