/* * linux/drivers/spi/spi-test.h * * (c) Martin Sperl * * spi_test definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #define SPI_TEST_MAX_TRANSFERS 4 #define SPI_TEST_MAX_SIZE (32 * PAGE_SIZE) #define SPI_TEST_MAX_ITERATE 32 /* the "dummy" start addresses used in spi_test * these addresses get translated at a later stage */ #define RX_START BIT(30) #define TX_START BIT(31) #define RX(off) ((void *)(RX_START + off)) #define TX(off) ((void *)(TX_START + off)) /* some special defines for offsets */ #define SPI_TEST_MAX_SIZE_HALF BIT(29) /* detection pattern for unfinished reads... * - 0x00 or 0xff could be valid levels for tx_buf = NULL, * so we do not use either of them */ #define SPI_TEST_PATTERN_UNWRITTEN 0xAA #define SPI_TEST_PATTERN_DO_NOT_WRITE 0x55 #define SPI_TEST_CHECK_DO_NOT_WRITE 64 /** * struct spi_test - describes a specific (set of) tests to execute * * @description: description of the test * * @msg: a template @spi_message usedfor the default settings * @transfers: array of @spi_transfers that are part of the * resulting spi_message. * @transfer_count: number of transfers * * @run_test: run a specific spi_test - this allows to override * the default implementation of @spi_test_run_transfer * either to add some custom filters for a specific test * or to effectively run some very custom tests... * @execute_msg: run the spi_message for real - this allows to override * @spi_test_execute_msg to apply final modifications * on the spi_message * @expected_return: the expected return code - in some cases we want to * test also for error conditions * * @iterate_len: list of length to iterate on * @iterate_tx_align: change the alignment of @spi_transfer.tx_buf * for all values in the below range if set. * the ranges are: * [0 : @spi_master.dma_alignment[ if set * [0 : iterate_tx_align[ if unset * @iterate_rx_align: change the alignment of @spi_transfer.rx_buf * see @iterate_tx_align for details * @iterate_transfer_mask: the bitmask of transfers to which the iterations * apply - if 0, then it applies to all transfer * * @fill_option: define the way how tx_buf is filled * @fill_pattern: fill pattern to apply to the tx_buf * (used in some of the @fill_options) * @elapsed_time: elapsed time in nanoseconds */ struct spi_test { char description[64]; struct spi_message msg; struct spi_transfer transfers[SPI_TEST_MAX_TRANSFERS]; unsigned int transfer_count; int (*run_test)(struct spi_device *spi, struct spi_test *test, void *tx, void *rx); int (*execute_msg)(struct spi_device *spi, struct spi_test *test, void *tx, void *rx); int expected_return; /* iterate over all values, terminated by a -1 */ int iterate_len[SPI_TEST_MAX_ITERATE]; int iterate_tx_align; int iterate_rx_align; u32 iterate_transfer_mask; /* the tx-fill operation */ u32 fill_option; #define FILL_MEMSET_8 0 /* just memset with 8 bit */ #define FILL_MEMSET_16 1 /* just memset with 16 bit */ #define FILL_MEMSET_24 2 /* just memset with 24 bit */ #define FILL_MEMSET_32 3 /* just memset with 32 bit */ #define FILL_COUNT_8 4 /* fill with a 8 byte counter */ #define FILL_COUNT_16 5 /* fill with a 16 bit counter */ #define FILL_COUNT_24 6 /* fill with a 24 bit counter */ #define FILL_COUNT_32 7 /* fill with a 32 bit counter */ #define FILL_TRANSFER_BYTE_8 8 /* fill with the transfer byte - 8 bit */ #define FILL_TRANSFER_BYTE_16 9 /* fill with the transfer byte - 16 bit */ #define FILL_TRANSFER_BYTE_24 10 /* fill with the transfer byte - 24 bit */ #define FILL_TRANSFER_BYTE_32 11 /* fill with the transfer byte - 32 bit */ #define FILL_TRANSFER_NUM 16 /* fill with the transfer number */ u32 fill_pattern; unsigned long long elapsed_time; }; /* default implementation for @spi_test.run_test */ int spi_test_run_test(struct spi_device *spi, const struct spi_test *test, void *tx, void *rx); /* default implementation for @spi_test.execute_msg */ int spi_test_execute_msg(struct spi_device *spi, struct spi_test *test, void *tx, void *rx); /* function to execute a set of tests */ int spi_test_run_tests(struct spi_device *spi, struct spi_test *tests); #define ITERATE_LEN_LIST 0, 1, 2, 3, 7, 11, 16, 31, 32, 64, 97, 128, 251, 256, \ 1021, 1024, 1031, 4093, PAGE_SIZE, 4099, 65536, 65537 /* some of the default @spi_transfer.len to test, terminated by a -1 */ #define ITERATE_LEN ITERATE_LEN_LIST, -1 #define ITERATE_MAX_LEN ITERATE_LEN_LIST, (SPI_TEST_MAX_SIZE - 1), \ SPI_TEST_MAX_SIZE, -1 /* the default alignment to test */ #define ITERATE_ALIGN sizeof(int)