/* Sensirion SHT3x-DIS humidity and temperature sensor driver. * The SHT3x comes in many different versions, this driver is for the * I2C version only. * * Copyright (C) 2016 Sensirion AG, Switzerland * Author: David Frey * Author: Pascal Sachs * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include /* commands (high precision mode) */ static const unsigned char sht3x_cmd_measure_blocking_hpm[] = { 0x2c, 0x06 }; static const unsigned char sht3x_cmd_measure_nonblocking_hpm[] = { 0x24, 0x00 }; /* commands (low power mode) */ static const unsigned char sht3x_cmd_measure_blocking_lpm[] = { 0x2c, 0x10 }; static const unsigned char sht3x_cmd_measure_nonblocking_lpm[] = { 0x24, 0x16 }; /* commands for periodic mode */ static const unsigned char sht3x_cmd_measure_periodic_mode[] = { 0xe0, 0x00 }; static const unsigned char sht3x_cmd_break[] = { 0x30, 0x93 }; /* commands for heater control */ static const unsigned char sht3x_cmd_heater_on[] = { 0x30, 0x6d }; static const unsigned char sht3x_cmd_heater_off[] = { 0x30, 0x66 }; /* other commands */ static const unsigned char sht3x_cmd_read_status_reg[] = { 0xf3, 0x2d }; static const unsigned char sht3x_cmd_clear_status_reg[] = { 0x30, 0x41 }; /* delays for non-blocking i2c commands, both in us */ #define SHT3X_NONBLOCKING_WAIT_TIME_HPM 15000 #define SHT3X_NONBLOCKING_WAIT_TIME_LPM 4000 #define SHT3X_WORD_LEN 2 #define SHT3X_CMD_LENGTH 2 #define SHT3X_CRC8_LEN 1 #define SHT3X_RESPONSE_LENGTH 6 #define SHT3X_CRC8_POLYNOMIAL 0x31 #define SHT3X_CRC8_INIT 0xFF #define SHT3X_MIN_TEMPERATURE -45000 #define SHT3X_MAX_TEMPERATURE 130000 #define SHT3X_MIN_HUMIDITY 0 #define SHT3X_MAX_HUMIDITY 100000 enum sht3x_chips { sht3x, sts3x, }; enum sht3x_limits { limit_max = 0, limit_max_hyst, limit_min, limit_min_hyst, }; DECLARE_CRC8_TABLE(sht3x_crc8_table); /* periodic measure commands (high precision mode) */ static const char periodic_measure_commands_hpm[][SHT3X_CMD_LENGTH] = { /* 0.5 measurements per second */ {0x20, 0x32}, /* 1 measurements per second */ {0x21, 0x30}, /* 2 measurements per second */ {0x22, 0x36}, /* 4 measurements per second */ {0x23, 0x34}, /* 10 measurements per second */ {0x27, 0x37}, }; /* periodic measure commands (low power mode) */ static const char periodic_measure_commands_lpm[][SHT3X_CMD_LENGTH] = { /* 0.5 measurements per second */ {0x20, 0x2f}, /* 1 measurements per second */ {0x21, 0x2d}, /* 2 measurements per second */ {0x22, 0x2b}, /* 4 measurements per second */ {0x23, 0x29}, /* 10 measurements per second */ {0x27, 0x2a}, }; struct sht3x_limit_commands { const char read_command[SHT3X_CMD_LENGTH]; const char write_command[SHT3X_CMD_LENGTH]; }; static const struct sht3x_limit_commands limit_commands[] = { /* temp1_max, humidity1_max */ [limit_max] = { {0xe1, 0x1f}, {0x61, 0x1d} }, /* temp_1_max_hyst, humidity1_max_hyst */ [limit_max_hyst] = { {0xe1, 0x14}, {0x61, 0x16} }, /* temp1_min, humidity1_min */ [limit_min] = { {0xe1, 0x02}, {0x61, 0x00} }, /* temp_1_min_hyst, humidity1_min_hyst */ [limit_min_hyst] = { {0xe1, 0x09}, {0x61, 0x0B} }, }; #define SHT3X_NUM_LIMIT_CMD ARRAY_SIZE(limit_commands) static const u16 mode_to_update_interval[] = { 0, 2000, 1000, 500, 250, 100, }; struct sht3x_data { struct i2c_client *client; struct mutex i2c_lock; /* lock for sending i2c commands */ struct mutex data_lock; /* lock for updating driver data */ u8 mode; const unsigned char *command; u32 wait_time; /* in us*/ unsigned long last_update; /* last update in periodic mode*/ struct sht3x_platform_data setup; /* * cached values for temperature and humidity and limits * the limits arrays have the following order: * max, max_hyst, min, min_hyst */ int temperature; int temperature_limits[SHT3X_NUM_LIMIT_CMD]; u32 humidity; u32 humidity_limits[SHT3X_NUM_LIMIT_CMD]; }; static u8 get_mode_from_update_interval(u16 value) { size_t index; u8 number_of_modes = ARRAY_SIZE(mode_to_update_interval); if (value == 0) return 0; /* find next faster update interval */ for (index = 1; index < number_of_modes; index++) { if (mode_to_update_interval[index] <= value) return index; } return number_of_modes - 1; } static int sht3x_read_from_command(struct i2c_client *client, struct sht3x_data *data, const char *command, char *buf, int length, u32 wait_time) { int ret; mutex_lock(&data->i2c_lock); ret = i2c_master_send(client, command, SHT3X_CMD_LENGTH); if (ret != SHT3X_CMD_LENGTH) { ret = ret < 0 ? ret : -EIO; goto out; } if (wait_time) usleep_range(wait_time, wait_time + 1000); ret = i2c_master_recv(client, buf, length); if (ret != length) { ret = ret < 0 ? ret : -EIO; goto out; } ret = 0; out: mutex_unlock(&data->i2c_lock); return ret; } static int sht3x_extract_temperature(u16 raw) { /* * From datasheet: * T = -45 + 175 * ST / 2^16 * Adapted for integer fixed point (3 digit) arithmetic. */ return ((21875 * (int)raw) >> 13) - 45000; } static u32 sht3x_extract_humidity(u16 raw) { /* * From datasheet: * RH = 100 * SRH / 2^16 * Adapted for integer fixed point (3 digit) arithmetic. */ return (12500 * (u32)raw) >> 13; } static struct sht3x_data *sht3x_update_client(struct device *dev) { struct sht3x_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; u16 interval_ms = mode_to_update_interval[data->mode]; unsigned long interval_jiffies = msecs_to_jiffies(interval_ms); unsigned char buf[SHT3X_RESPONSE_LENGTH]; u16 val; int ret = 0; mutex_lock(&data->data_lock); /* * Only update cached readings once per update interval in periodic * mode. In single shot mode the sensor measures values on demand, so * every time the sysfs interface is called, a measurement is triggered. * In periodic mode however, the measurement process is handled * internally by the sensor and reading out sensor values only makes * sense if a new reading is available. */ if (time_after(jiffies, data->last_update + interval_jiffies)) { ret = sht3x_read_from_command(client, data, data->command, buf, sizeof(buf), data->wait_time); if (ret) goto out; val = be16_to_cpup((__be16 *)buf); data->temperature = sht3x_extract_temperature(val); val = be16_to_cpup((__be16 *)(buf + 3)); data->humidity = sht3x_extract_humidity(val); data->last_update = jiffies; } out: mutex_unlock(&data->data_lock); if (ret) return ERR_PTR(ret); return data; } /* sysfs attributes */ static ssize_t temp1_input_show(struct device *dev, struct device_attribute *attr, char *buf) { struct sht3x_data *data = sht3x_update_client(dev); if (IS_ERR(data)) return PTR_ERR(data); return sprintf(buf, "%d\n", data->temperature); } static ssize_t humidity1_input_show(struct device *dev, struct device_attribute *attr, char *buf) { struct sht3x_data *data = sht3x_update_client(dev); if (IS_ERR(data)) return PTR_ERR(data); return sprintf(buf, "%u\n", data->humidity); } /* * limits_update must only be called from probe or with data_lock held */ static int limits_update(struct sht3x_data *data) { int ret; u8 index; int temperature; u32 humidity; u16 raw; char buffer[SHT3X_RESPONSE_LENGTH]; const struct sht3x_limit_commands *commands; struct i2c_client *client = data->client; for (index = 0; index < SHT3X_NUM_LIMIT_CMD; index++) { commands = &limit_commands[index]; ret = sht3x_read_from_command(client, data, commands->read_command, buffer, SHT3X_RESPONSE_LENGTH, 0); if (ret) return ret; raw = be16_to_cpup((__be16 *)buffer); temperature = sht3x_extract_temperature((raw & 0x01ff) << 7); humidity = sht3x_extract_humidity(raw & 0xfe00); data->temperature_limits[index] = temperature; data->humidity_limits[index] = humidity; } return ret; } static ssize_t temp1_limit_show(struct device *dev, struct device_attribute *attr, char *buf) { struct sht3x_data *data = dev_get_drvdata(dev); u8 index = to_sensor_dev_attr(attr)->index; int temperature_limit = data->temperature_limits[index]; return scnprintf(buf, PAGE_SIZE, "%d\n", temperature_limit); } static ssize_t humidity1_limit_show(struct device *dev, struct device_attribute *attr, char *buf) { struct sht3x_data *data = dev_get_drvdata(dev); u8 index = to_sensor_dev_attr(attr)->index; u32 humidity_limit = data->humidity_limits[index]; return scnprintf(buf, PAGE_SIZE, "%u\n", humidity_limit); } /* * limit_store must only be called with data_lock held */ static size_t limit_store(struct device *dev, size_t count, u8 index, int temperature, u32 humidity) { char buffer[SHT3X_CMD_LENGTH + SHT3X_WORD_LEN + SHT3X_CRC8_LEN]; char *position = buffer; int ret; u16 raw; struct sht3x_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; const struct sht3x_limit_commands *commands; commands = &limit_commands[index]; memcpy(position, commands->write_command, SHT3X_CMD_LENGTH); position += SHT3X_CMD_LENGTH; /* * ST = (T + 45) / 175 * 2^16 * SRH = RH / 100 * 2^16 * adapted for fixed point arithmetic and packed the same as * in limit_show() */ raw = ((u32)(temperature + 45000) * 24543) >> (16 + 7); raw |= ((humidity * 42950) >> 16) & 0xfe00; *((__be16 *)position) = cpu_to_be16(raw); position += SHT3X_WORD_LEN; *position = crc8(sht3x_crc8_table, position - SHT3X_WORD_LEN, SHT3X_WORD_LEN, SHT3X_CRC8_INIT); mutex_lock(&data->i2c_lock); ret = i2c_master_send(client, buffer, sizeof(buffer)); mutex_unlock(&data->i2c_lock); if (ret != sizeof(buffer)) return ret < 0 ? ret : -EIO; data->temperature_limits[index] = temperature; data->humidity_limits[index] = humidity; return count; } static ssize_t temp1_limit_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int temperature; int ret; struct sht3x_data *data = dev_get_drvdata(dev); u8 index = to_sensor_dev_attr(attr)->index; ret = kstrtoint(buf, 0, &temperature); if (ret) return ret; temperature = clamp_val(temperature, SHT3X_MIN_TEMPERATURE, SHT3X_MAX_TEMPERATURE); mutex_lock(&data->data_lock); ret = limit_store(dev, count, index, temperature, data->humidity_limits[index]); mutex_unlock(&data->data_lock); return ret; } static ssize_t humidity1_limit_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { u32 humidity; int ret; struct sht3x_data *data = dev_get_drvdata(dev); u8 index = to_sensor_dev_attr(attr)->index; ret = kstrtou32(buf, 0, &humidity); if (ret) return ret; humidity = clamp_val(humidity, SHT3X_MIN_HUMIDITY, SHT3X_MAX_HUMIDITY); mutex_lock(&data->data_lock); ret = limit_store(dev, count, index, data->temperature_limits[index], humidity); mutex_unlock(&data->data_lock); return ret; } static void sht3x_select_command(struct sht3x_data *data) { /* * In blocking mode (clock stretching mode) the I2C bus * is blocked for other traffic, thus the call to i2c_master_recv() * will wait until the data is ready. For non blocking mode, we * have to wait ourselves. */ if (data->mode > 0) { data->command = sht3x_cmd_measure_periodic_mode; data->wait_time = 0; } else if (data->setup.blocking_io) { data->command = data->setup.high_precision ? sht3x_cmd_measure_blocking_hpm : sht3x_cmd_measure_blocking_lpm; data->wait_time = 0; } else { if (data->setup.high_precision) { data->command = sht3x_cmd_measure_nonblocking_hpm; data->wait_time = SHT3X_NONBLOCKING_WAIT_TIME_HPM; } else { data->command = sht3x_cmd_measure_nonblocking_lpm; data->wait_time = SHT3X_NONBLOCKING_WAIT_TIME_LPM; } } } static int status_register_read(struct device *dev, struct device_attribute *attr, char *buffer, int length) { int ret; struct sht3x_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; ret = sht3x_read_from_command(client, data, sht3x_cmd_read_status_reg, buffer, length, 0); return ret; } static ssize_t temp1_alarm_show(struct device *dev, struct device_attribute *attr, char *buf) { char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN]; int ret; ret = status_register_read(dev, attr, buffer, SHT3X_WORD_LEN + SHT3X_CRC8_LEN); if (ret) return ret; return scnprintf(buf, PAGE_SIZE, "%d\n", !!(buffer[0] & 0x04)); } static ssize_t humidity1_alarm_show(struct device *dev, struct device_attribute *attr, char *buf) { char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN]; int ret; ret = status_register_read(dev, attr, buffer, SHT3X_WORD_LEN + SHT3X_CRC8_LEN); if (ret) return ret; return scnprintf(buf, PAGE_SIZE, "%d\n", !!(buffer[0] & 0x08)); } static ssize_t heater_enable_show(struct device *dev, struct device_attribute *attr, char *buf) { char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN]; int ret; ret = status_register_read(dev, attr, buffer, SHT3X_WORD_LEN + SHT3X_CRC8_LEN); if (ret) return ret; return scnprintf(buf, PAGE_SIZE, "%d\n", !!(buffer[0] & 0x20)); } static ssize_t heater_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct sht3x_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; int ret; bool status; ret = kstrtobool(buf, &status); if (ret) return ret; mutex_lock(&data->i2c_lock); if (status) ret = i2c_master_send(client, (char *)&sht3x_cmd_heater_on, SHT3X_CMD_LENGTH); else ret = i2c_master_send(client, (char *)&sht3x_cmd_heater_off, SHT3X_CMD_LENGTH); mutex_unlock(&data->i2c_lock); return ret; } static ssize_t update_interval_show(struct device *dev, struct device_attribute *attr, char *buf) { struct sht3x_data *data = dev_get_drvdata(dev); return scnprintf(buf, PAGE_SIZE, "%u\n", mode_to_update_interval[data->mode]); } static ssize_t update_interval_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { u16 update_interval; u8 mode; int ret; const char *command; struct sht3x_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; ret = kstrtou16(buf, 0, &update_interval); if (ret) return ret; mode = get_mode_from_update_interval(update_interval); mutex_lock(&data->data_lock); /* mode did not change */ if (mode == data->mode) { mutex_unlock(&data->data_lock); return count; } mutex_lock(&data->i2c_lock); /* * Abort periodic measure mode. * To do any changes to the configuration while in periodic mode, we * have to send a break command to the sensor, which then falls back * to single shot (mode = 0). */ if (data->mode > 0) { ret = i2c_master_send(client, sht3x_cmd_break, SHT3X_CMD_LENGTH); if (ret != SHT3X_CMD_LENGTH) goto out; data->mode = 0; } if (mode > 0) { if (data->setup.high_precision) command = periodic_measure_commands_hpm[mode - 1]; else command = periodic_measure_commands_lpm[mode - 1]; /* select mode */ ret = i2c_master_send(client, command, SHT3X_CMD_LENGTH); if (ret != SHT3X_CMD_LENGTH) goto out; } /* select mode and command */ data->mode = mode; sht3x_select_command(data); out: mutex_unlock(&data->i2c_lock); mutex_unlock(&data->data_lock); if (ret != SHT3X_CMD_LENGTH) return ret < 0 ? ret : -EIO; return count; } static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, temp1_input_show, NULL, 0); static SENSOR_DEVICE_ATTR(humidity1_input, S_IRUGO, humidity1_input_show, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, temp1_limit_show, temp1_limit_store, limit_max); static SENSOR_DEVICE_ATTR(humidity1_max, S_IRUGO | S_IWUSR, humidity1_limit_show, humidity1_limit_store, limit_max); static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, temp1_limit_show, temp1_limit_store, limit_max_hyst); static SENSOR_DEVICE_ATTR(humidity1_max_hyst, S_IRUGO | S_IWUSR, humidity1_limit_show, humidity1_limit_store, limit_max_hyst); static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, temp1_limit_show, temp1_limit_store, limit_min); static SENSOR_DEVICE_ATTR(humidity1_min, S_IRUGO | S_IWUSR, humidity1_limit_show, humidity1_limit_store, limit_min); static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO | S_IWUSR, temp1_limit_show, temp1_limit_store, limit_min_hyst); static SENSOR_DEVICE_ATTR(humidity1_min_hyst, S_IRUGO | S_IWUSR, humidity1_limit_show, humidity1_limit_store, limit_min_hyst); static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, temp1_alarm_show, NULL, 0); static SENSOR_DEVICE_ATTR(humidity1_alarm, S_IRUGO, humidity1_alarm_show, NULL, 0); static SENSOR_DEVICE_ATTR(heater_enable, S_IRUGO | S_IWUSR, heater_enable_show, heater_enable_store, 0); static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, update_interval_show, update_interval_store, 0); static struct attribute *sht3x_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_humidity1_input.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, &sensor_dev_attr_humidity1_max.dev_attr.attr, &sensor_dev_attr_humidity1_max_hyst.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_temp1_min_hyst.dev_attr.attr, &sensor_dev_attr_humidity1_min.dev_attr.attr, &sensor_dev_attr_humidity1_min_hyst.dev_attr.attr, &sensor_dev_attr_temp1_alarm.dev_attr.attr, &sensor_dev_attr_humidity1_alarm.dev_attr.attr, &sensor_dev_attr_heater_enable.dev_attr.attr, &sensor_dev_attr_update_interval.dev_attr.attr, NULL }; static struct attribute *sts3x_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, NULL }; ATTRIBUTE_GROUPS(sht3x); ATTRIBUTE_GROUPS(sts3x); static int sht3x_probe(struct i2c_client *client, const struct i2c_device_id *id) { int ret; struct sht3x_data *data; struct device *hwmon_dev; struct i2c_adapter *adap = client->adapter; struct device *dev = &client->dev; const struct attribute_group **attribute_groups; /* * we require full i2c support since the sht3x uses multi-byte read and * writes as well as multi-byte commands which are not supported by * the smbus protocol */ if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) return -ENODEV; ret = i2c_master_send(client, sht3x_cmd_clear_status_reg, SHT3X_CMD_LENGTH); if (ret != SHT3X_CMD_LENGTH) return ret < 0 ? ret : -ENODEV; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; data->setup.blocking_io = false; data->setup.high_precision = true; data->mode = 0; data->last_update = jiffies - msecs_to_jiffies(3000); data->client = client; crc8_populate_msb(sht3x_crc8_table, SHT3X_CRC8_POLYNOMIAL); if (client->dev.platform_data) data->setup = *(struct sht3x_platform_data *)dev->platform_data; sht3x_select_command(data); mutex_init(&data->i2c_lock); mutex_init(&data->data_lock); /* * An attempt to read limits register too early * causes a NACK response from the chip. * Waiting for an empirical delay of 500 us solves the issue. */ usleep_range(500, 600); ret = limits_update(data); if (ret) return ret; if (id->driver_data == sts3x) attribute_groups = sts3x_groups; else attribute_groups = sht3x_groups; hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, data, attribute_groups); if (IS_ERR(hwmon_dev)) dev_dbg(dev, "unable to register hwmon device\n"); return PTR_ERR_OR_ZERO(hwmon_dev); } /* device ID table */ static const struct i2c_device_id sht3x_ids[] = { {"sht3x", sht3x}, {"sts3x", sts3x}, {} }; MODULE_DEVICE_TABLE(i2c, sht3x_ids); static struct i2c_driver sht3x_i2c_driver = { .driver.name = "sht3x", .probe = sht3x_probe, .id_table = sht3x_ids, }; module_i2c_driver(sht3x_i2c_driver); MODULE_AUTHOR("David Frey "); MODULE_AUTHOR("Pascal Sachs "); MODULE_DESCRIPTION("Sensirion SHT3x humidity and temperature sensor driver"); MODULE_LICENSE("GPL");