Wireless daemon for Linux ************************* Copyright (C) 2013-2019 Intel Corporation. All rights reserved. Compilation and installation ============================ In order to compile the source code you need following software packages: - GCC compiler - GNU C library - Embedded Linux library - readline (command line client) To configure run: ./configure --prefix=/usr Configure automatically searches for all required components and packages. To compile and install run: make && make install Embedded Linux library ====================== In order to compile the daemon and control utility the development version of Embedded Linux library is required to be present. The development repositories can be found here: git://git.kernel.org/pub/scm/libs/ell/ell.git https://kernel.googlesource.com/pub/scm/libs/ell/ell.git The build systems requires that the Embedded Linux library source code is available on the same top level directory as the Wireless daemon source code: . |--- ell | |--- ell | `--- unit `--- iwd |--- src `--- client It is not required to build or install Embedded Linux library. The build will happen when building the Wireless daemon and it will then be linked internally. When using --enable-external-ell build option, it is not required that the Embedded Linux library source code is available in the top level directory. The tarballs include a copy of the Embedded Linux library source files. When building from the tarballs, then it is not required to have the library sources available in the top level directory. Manual pages ============ The manual pages are generated from reStructuredText markup source files during the normal build process. The generation requires the rst2man utility from Python Docutils project. If rst2man is for some reason not available, using --disable-manual-pages will skip the manual pages generation and installation. When building from the tarballs, a copy of the generated manual pages is included and the rst2man utility is actually not needed. Configuration and options ========================= The configuration system provides switches to disable certain build time configuration options which are generally useful and enabled by default: --disable-daemon Disable installation of Wireless daemon By default the Wireless daemon binary iwd is enabled and placed into --libexecdir directory. --disable-client Disable installation of Wireless client utility By default the Wireless client binary iwctl is enabled and place into --bindir directory. --disable-monitor Disable installation of Wireless monitor utility By default the Wireless monitor binary iwmon is enabled and place into --bindir directory. --disable-dbus-policy Disable installation of D-Bus system policy configuration By default the accompanying D-Bus policy file will be installed in the D-Bus data directory. The location of that directory will be automatically detected or can be manually configured via the --with-dbus-datadir option. The D-Bus policy is required for daemons to gain service name ownership and clients to access them. When disabling this option, manual installation of D-Bus polices is required. Note: This option affects all D-Bus policy configurations. --disable-systemd-service Disable installation of systemd service configuration By default the accompanying systemd service unit with D-Bus autostart configuration will be installed. The locations will be automatically detected or can be manually configured via --with-dbus-busdir option and --with-systemd-unitdir option. Using systemd is optional, but highly recommended. When disabling this option, manual installation is required. Note: This option affects all systemd unit setups. --disable-manual-pages Disable generation and installation of manual pages By default all available manual pages will be generated and installed. When disabling this options, no manual pages are installed. Note: This options affects all manual pages. When building for a system that wants to use wireless technology, disabling any of the above options makes only limited sense. It may break the general setup and usability for wireless connections. The configuration system provides switches for optional build time features that can be enabled if the functionality is required: --enable-external-ell Enable usage of external Embedded Linux library This allows using an externally installed Embedded Linux library instead of using the internal copy of ELL. Since the public API of Embedded Linux library is not yet stable, the usage of the internal ELL copy is preferred. --enable-wired Enable installation of Ethernet authentication daemon This allows enabling the Ethernet daemon binary ead which is then placed into --libexecdir directory. With this option the support for 802.1x for wired Ethernet connections can be enabled. It provides its own D-Bus policy and systemd configuration. --enable-hwsim Enable installation of Wireless simulation utility This allows enabling the Simulation daemon binary hwsim which is then placed into --bindir directory. With this utility and mac80211_hwim kernel module the simulation of 802.11 networks can be tested. It provides its own D-Bus policy configuration. This utility is only useful for developers and should not be considered for general installation. For this reason no systemd configuration is provided. --enable-tools Enable compilation of various testing utilities This enables building of all utilities that are however not installed and only useful during development. --enable-ofono Enable support for oFono SIM authentication Note: With --disable-daemon this option is ignored Netlink monitoring ================== The included iwmon utility can be used to monitor the 802.11 subsystem generic netlink commands and events. It uses the nlmon kernel driver from Linux 3.10 and later. On startup network monitor interface named named 'nlmon' is created unless another interface name is given on the command line. If the monitor interface was created by the iwmon utility, it will be removed on program exit. Manually the monitor interface can be created using the following commands: ip link add name nlmon type nlmon ip link set dev nlmon allmulticast on ip link set dev nlmon up It is possible to create netlink traces in PCAP format using tcpdump and then read them via iwmon utility: tcpdump -i nlmon -w trace-file.pcap The resulting PCAP files will use Linux cooked packet format containing packets with ARPHRD_NETLINK type. They can be read using iwmon: iwmon -r trace-file.pcap At this time iwmon is not able to write PCAP files by itself. This might change in future versions. When also the authentication protocol traffic on port 0x888e (ETH_P_PAE) is needed, then a second capture is required: tcpdump -i any 'ether proto 0x888e' -w trace-pae.pcap It is possible to combine these two PCAP files using the mergecap utility and create a combined trace file: mergecap -F pcap -w trace.pcap trace-file.pcap trace-pae.pcap This will create a trace.pcap file that includes the complete picture of nl80211 netlink traffic and authentication messages. All packets are merged in chronological order based on timestamps. Unfortunately it is not possible to instruct tcpdump filtering to do this in a single capture. Post-processing of the PCAP files is required at the moment. Simulating devices ================== The Linux driver mac80211_hwsim provides the functionality to simulate Wireless devices using fake virtual air. Just load the module. modprobe mac80211_hwsim radios=0 Providing the radios=0 is important since otherwise it starts out with two new Wireless radios by default. With the provided hwsim utility it is now possible to add and remove virtual radio devices. hwsim --create --keep hwsim --destroy= The radio id assigned to each virtual device is its internal id used by the Wireless device. Information =========== Mailing list: https://lists.01.org/postorius/lists/iwd.lists.01.org/ IRC: irc://irc.freenode.net/#iwd Wiki: https://iwd.wiki.kernel.org/